Renovo Trio Stage 2 Replacement Filter
The Renovo Ultra Filtration (UF) hollow fiber membrane is unique in a couple ways.It has a large surface area that enables a high flow rate. The membrane has a smaller pore size than other hollow fiber membrane filters. When the Renovo hollow fiber membrane has reduced flow, back flush the filter with clean water and continue use. Back flush this element before putting in storage.
How To Replace: Hold the Trio upright and remove the cap. Turn the tip counter clockwise and pull up to remove from the housing. Unscrew bottom pre-filter. From the bottom, lightly push the UF hollow fiber filter up till it can be grabbed from the top. Set aside the round spacer. Drop in new filter element by lightly pushing down till it stops in the filter housing. Replace round spacer. Put filter back together by repeating steps 1-4 in reverse order.